不同进水流速对泵站进水池漩涡的影响

为探究泵站进水流速大小与泵站进水池水流流态、漩涡的产生与发展变化规律,结合泵站实际运行情况,建立引渠、前池、进水池和进水管的泵站物理模型和湍流数学模型,采用VOF模型和非定常的SST k-ω湍流模型对9种不同流速的泵站进水水流特性进行数值模拟,分析不同进水流速的泵站进水池水流流场分布、漩涡涡量的变化及分布规律。研究结果表明:当进水流速为0.322 2～0.564 2 m/s时,泵站表面漩涡的强度随进水流速的增大而增强:当进水流速为0.322 2～0.401 6 m/s时,进水池出现Ⅲ、Ⅳ型漩涡;当进水流速为0.483 5 m/s时,进水池出现Ⅴ型漩涡;当进水流速为0.520 8～0.564 2 m/s时,进水池出现Ⅵ型漩涡。将数值计算结果与模型试验结果进行对比,两者基本吻合。研究结果可为泵站工程设计提供参考。     

Predictive process mapping for laser powder bed fusion: A review of existing analytical solutions

One of the main challenges in the laser powder bed fusion (LPBF) process is making dense and defect-free components. These porosity defects are dependent upon the melt pool geometry and the processing conditions. Power-velocity (PV) processing maps can aid in visualizing the effects of LPBF processing variables and mapping different defect regimes such as lack-of-fusion, under-melting, balling, and keyholing. This work presents an assessment of existing analytical equations and models that provide an estimate of the melt pool geometry as a function of material properties. The melt pool equations are then combined with defect criteria to provide a quick approximation of the PV processing maps for a variety of materials. Finally, the predictions of these processing maps are compared with experimental data from the literature. The predictive processing maps can be computed quickly and can be coupled with dimensionless numbers and high-throughput (HT) experiments for validation. The present work provides a boundary framework for designing the optimal processing parameters for new metals and alloys based on existing analytical solutions.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

石墨烯纳米制冷剂核态池沸腾换热的实验研究

为分析单层石墨烯纳米片对核态池沸腾换热的影响机理，对基液为R141b、分散相为单层石墨烯纳米片的纳米制冷剂的核态池沸腾换热特征进行了测定，采用Hot Disk热物性分析仪和铂金板法分别测定了石墨烯纳米制冷剂的热导率和表面张力，采用接触角测量仪和扫描电子显微镜（SEM）观测了沸腾后加热表面的润湿性和形貌特征。实验中，单层石墨烯纳米片的质量百分含量（ω）为0.02%~0.50%，实验压力为一个标准大气压，热流密度为20~200 kW/m2。实验结果表明：单层石墨烯纳米片的加入，使制冷剂R141b的核态池沸腾换热得到强化；当ω=0.2%时，换热系数提高比例出现峰值，为57.7%。伴随ω的增加，石墨烯纳米制冷剂的热导率增大、表面张力减小，沸腾表面润湿性增强且微腔数先增后减，综合作用的结果导致存在一个最佳的单层石墨烯纳米片浓度（即ω=0.2%）使换热系数最高。     

基于径流污染控制目标为目的的分流制初期雨水调蓄池容积确定

鉴于初期雨水污染为地表水体的主要污染源之一,以儒乐湖初期雨水调蓄池容积确定为例,采用调蓄池工程措施进行截流,以V类水体标准为径流污染控制目标,在《室外排水设计规范》中控制径流污染的分流制初期雨水调蓄池计算公式的基础上,应用模型法模拟得出控制目标下的初期雨水径流累积深度及调蓄池容积。结果表明,截留径流累积深度为7mm,初期雨水调蓄池容积分别为9 250、5 850m^3时,研究区域内能够满足在管网重现期下排水水质达到V类水体标准。研究成果可为初期雨水截流工程实施提供建议及参考。     

Assessment of chemical and microbiological parameters of indoor swimming pool atmosphere using multiple comparisons

The aim of this study was to evaluate the air quality of an indoor swimming pool, analyzing diurnal and seasonal variations in microbiological counts and chemical parameters. The results indicated that yeast and bacteria counts, as well as carbon dioxide (CO₂), nitrogen oxides (NO_x) and O₃ concentrations, showed significant diurnal difference. On the other hand, temperature, relative humidity (R.H.), yeast counts and concentrations of CO₂, particles, O₃, toluene, and benzene showed seasonal differences. In addition, the relationship between indoor and outdoor air and the degree of correlation between the different parameters have been calculated, suggesting that CO₂, fine particles and NO_x would have indoor origin due to the human activity and secondary reactions favored by the chemical and environmental conditions of the swimming pool; while O₃, benzene and toluene, would come from outside, mainly. The overall results indicated that indoor air quality (IAQ) in the swimming pool building was deficient by the high levels of CO₂ and microorganisms, low temperatures, and high R.H., because frequently the limits established by the legislation were exceeded. This fact could be due to the poor ventilation and the inadequate operation of heating, ventilation, and air‐conditioning systems.     

基于WiMAX通信网络的电源监控系统的构建

分析了全球微波接入互存(WiMAX)的技术特点和算法复杂度,探讨了其在电源监控系统中的应用,提出了基于Inter WiMAX Connection 2250技术的远程电源监控系统。在讨论WiMAX物理层算法的基础上,确定了以正交频分多址(OFDMA)模式为主体的物理层通信协议,提高了信道的利用率,抑制了码间干扰,为构建电源监控系统打下了良好的基础。     

Experimental study of the combustion characteristics of methanol‐gasoline blends pool fires in a full‐scale tunnel

The combustion characteristics of methanol‐gasoline blends pool fires were studied in a series of full‐scale tunnel experiments conducted with different methanol and gasoline blends. The parameters were measured including the mass loss rate, the pool surface temperature, the fire plume centerline temperature, the ceiling temperature, the smoke layer temperature profile, the flame height, and the smoke layer interface height. The gasoline components were analyzed by GC‐MS. The effects of azeotropism on the combustion characteristics of the different blends were discussed. On the basis of the results of the fire plume centerline temperature, the ceiling temperature, and the flame height, it shows that the tunnel fire regime gradually switches from fuel controlled to ventilation controlled with increasing gasoline fractions in the blends. The fire plume can be divided into 3 regions by the fire plume centerline temperature for the different blends. The N‐percentage rule to determine the smoke layer interface height is found to be applicable for tunnel fires with different blends for N = 26.     

Ti-6Al-4V基体激光植入ZrO2颗粒工艺过程数值分析

为了提高Ti-6Al-4V合金零部件的表面强度及耐热性能，在利用激光熔化后的Ti-6Al-4V材料表面上植入ZrO2陶瓷颗粒。本文基于CFD计算方法建立了三维瞬态激光植入工艺过程数值分析模型并对部分实验结果进行了验证。该模型根据等效热效应对移动激光热源进行计算，利用VOF方法追踪流体的自由表面。考虑浮力、惯性力、粘性阻力对颗粒运动的影响分析了颗粒在熔池内的运动过程，对比分析了是否添加颗粒两种工况下熔池内的温度场与流场分布。结果表明颗粒的进入使得熔池内温度场与流场重新分布，流体的流动和熔池的凝固使颗粒分布于不同位置。通过对100μm深度上熔池不同位置处的颗粒数进行统计发现，随着激光扫描速率的增加，颗粒在基板上表面的分布更加密集。